Toolman

ARCH D paper size

609.6 × 914.4 mm

24 × 36 inches · 60.96 × 91.44 cm · aspect ratio 1:1.5

What ARCH D is for

ARCH D, 24 × 36 inches, is the default sheet for an American set of construction documents — the size floor plans are laid out at, the size title blocks are drawn for, and what a builder means by "a full-size sheet". It is four ARCH A sheets, or two ARCH C. The trap is ANSI D, which is 22 × 34 inches: two inches narrower and two shorter, close enough that a plotter accepts either without complaint, and different enough that a set sent to the wrong one is reduced by roughly 8% — after which every dimension a builder scales off the paper is wrong, silently, in the only direction nobody checks.

ARCH D in every unit

UnitWidthHeight
Millimetres609.6 mm914.4 mm
Centimetres60.96 cm91.44 cm
Inches24 in36 in
Points (PostScript)1728 pt2592 pt

ARCH D in pixels

Pixel dimensions depend entirely on the resolution you are working at — there is no single "pixel size" for a sheet of paper.

ResolutionPixelsUse
72 DPI1728 × 2592Screen preview only — far too coarse to print
150 DPI3600 × 5400Draft printing, internal documents
300 DPI7200 × 10800The standard for commercial print
600 DPI14400 × 21600Fine detail, line art, archival scanning

Setting up a print document? Use 300 DPI and add 3 mm of bleed on every edge unless your printer specifies otherwise.

How ARCH D relates to the rest of the series

About ARCH D

24 × 36 inches, the standard architectural drawing sheet.

Other Architectural sizes

SizeMillimetresInches
ARCH A228.6 × 304.8 mm9 × 12 in
ARCH B304.8 × 457.2 mm12 × 18 in
ARCH C457.2 × 609.6 mm18 × 24 in
ARCH E914.4 × 1219.2 mm36 × 48 in
ARCH E1762 × 1066.8 mm30 × 42 in

Frequently asked questions

What size is ARCH D in mm?

609.6 × 914.4 mm.

What size is ARCH D in inches?

24 × 36 inches.

What size is ARCH D in pixels?

There is no single answer — it depends on resolution. At the print standard of 300 DPI it is 7200 × 10800 pixels; at 72 DPI it is only 1728 × 2592.

Other paper sizes

All paper sizes · Convert mm to inches