43/64" drill bit size
0.6719 in
17.07 mm · fractional drill
| Inches | 0.6719 in |
| Millimetres | 17.07 mm |
| Nearest metric drill | 17.1 mm |
| System | Fractional (64ths) |
What 43/64" means
43/64" is a fractional drill, stepping in 64ths of an inch. Fractional sizes are the coarsest of the three systems, which is why a fractional set alone cannot hit most tapping sizes and why number and letter drills exist at all.
The same hole in the other systems
Three drill systems overlap across this range and a workshop rarely has all three. The nearest bit of each other kind to 43/64":
| System | Nearest size | Difference |
|---|---|---|
| number | #1 — 0.228 in | 0.4439 in smaller |
| letter | Z — 0.413 in | 0.2589 in smaller |
| metric | 17.1 mm | 0.034 mm larger |
The closest substitute is 0.2589 inches away. For a clearance hole that is nothing; for a tapping hole it moves the thread engagement by several per cent, which is the difference between an easy tap and a broken one.
What gets drilled at 0.6719 inches
Half an inch and up is where twist drills stop being the obvious tool. A bit this size in mild steel needs a pilot, a slow speed and something to hold the work; past three-quarters of an inch most people reach for a hole saw or a step drill instead.
Either side of it
| Drill | Inches | Millimetres |
|---|---|---|
| 5/8" | 0.625 in | 15.88 mm |
| 41/64" | 0.6406 in | 16.27 mm |
| 21/32" | 0.6563 in | 16.67 mm |
| 43/64" | 0.6719 in | 17.07 mm |
| 11/16" | 0.6875 in | 17.46 mm |
| 45/64" | 0.7031 in | 17.86 mm |
| 23/32" | 0.7188 in | 18.26 mm |
Frequently asked questions
What size is a 43/64" drill bit?
0.6719 inches, which is 17.07 mm. Fractional drills step in 64ths of an inch, which is the coarsest of the three systems and the one most home sets contain.
What is a 43/64" drill bit in mm?
17.07 mm. A metric index will offer 17.1 mm as the nearest stocked size, which is 0.034 mm larger — enough to matter when tapping and not enough to matter for a clearance hole.
Is 43/64" a tapping drill size?
Not for any of the unified threads on this site. The next size up, 11/16", is the tapping drill for 3/4-16.
What is the next size up from 43/64"?
11/16" at 0.6875 inches — 0.0156 inches larger. Below it is 21/32" at 0.6563.
Other sizes
- 11/16" drill bit — 0.6875 in, 17.46 mm
- 45/64" drill bit — 0.7031 in, 17.86 mm
- 23/32" drill bit — 0.7188 in, 18.26 mm
- 47/64" drill bit — 0.7344 in, 18.65 mm
- 3/4" drill bit — 0.75 in, 19.05 mm
- 49/64" drill bit — 0.7656 in, 19.45 mm
- 25/32" drill bit — 0.7813 in, 19.84 mm
- 51/64" drill bit — 0.7969 in, 20.24 mm