Toolman

JIS B0 in pixels

12165 × 17197 px

at 300 DPI, the print standard · JIS B0 is 1030 × 1456 mm · 209.2 megapixels

JIS B0 size in pixels has no single answer, because a pixel is a length only once a resolution decides how many fit in an inch. The JIS B0 pixel size is 12165 × 17197 px at the 300 DPI print standard and 2920 × 4127 px at the 72 DPI screen convention — every resolution in between is in the table below.

JIS B0 at every resolution

A sheet of paper has no pixel size of its own. It has a physical size — 1030 × 1456 mm, or 40.55 × 57.32 inches — and a pixel count only appears once you choose how many pixels go in each inch.

ResolutionPixelsMegapixelsUncompressed 24-bitUse
72 DPI2920 × 412712.1 MP34 MBScreen only — visibly soft in print
96 DPI3893 × 550321.4 MP61 MBScreen only — visibly soft in print
150 DPI6083 × 859852.3 MP150 MBDrafts, internal documents, large-format viewed from a distance
200 DPI8110 × 1146593.0 MP266 MBAcceptable for office printing
300 DPI12165 × 17197209.2 MP599 MBThe commercial print standard
400 DPI16220 × 22929371.9 MP1.04 GBFine detail and small type
600 DPI24331 × 34394836.8 MP2.34 GBLine art, technical drawings, archival scanning
1200 DPI48661 × 687873347.2 MP9.35 GBArchival and reproduction work

What the file size means for JIS B0

At 300 DPI an uncompressed JIS B0 is 599 MB, and at 600 DPI it is 2.34 GB — four times as much, because doubling the resolution doubles both dimensions. That squaring is the reason large formats become unwieldy so quickly: the same 300 DPI that produces a manageable file at small sizes produces 599 MB here.

If a file is going to a printer, ask what they want before choosing. 300 DPI is the safe default and 150 is often enough for anything read from more than arm's length.

Setting up the canvas

Width:      12165 px
Height:     17197 px
Resolution: 300 pixels/inch
Colour:     CMYK for print, RGB for screen
Bleed:      3 mm on every edge → 12236 × 17268 px

The bleed figure is the one people forget: artwork that runs to the edge must extend 3 mm past it on all four sides, so the working canvas is larger than the finished sheet.

Frequently asked questions

What is JIS B0 in pixels?

There is no single answer — it depends on the resolution. At the print standard of 300 DPI, JIS B0 is 12165 × 17197 pixels. On screen at 72 DPI it is only 2920 × 4127.

What resolution should an JIS B0 document be?

300 DPI for anything going to a commercial printer, which makes the canvas 12165 × 17197 pixels. 150 DPI (6083 × 8598) is acceptable for a draft or an internal document. Large formats read from a distance can go lower — a poster viewed from two metres looks sharp at 150 DPI, and dropping to it here saves 449 MB of file.

How big is an JIS B0 file at 300 DPI?

About 599 MB uncompressed at 24-bit colour — 12165 × 17197 × 3 bytes. Compression brings that down a great deal for flat artwork and very little for a photograph, which is why a print-ready JIS B0 PDF is usually tens of megabytes.

How many megapixels is JIS B0 at 300 DPI?

209.2 megapixels. For comparison, JIS B0 at 600 DPI is 836.8 MP — quadruple, because doubling the resolution doubles both dimensions.

Other sizes in pixels

JIS B0 in millimetres, inches and points · All paper sizes · Screen resolutions