M drill bit size
0.295 in
7.49 mm · letter drill
| Inches | 0.295 in |
| Millimetres | 7.49 mm |
| Nearest metric drill | 7.5 mm |
| System | Letter (A to Z) |
What M means
A bit marked M is a letter drill. Letters run A to Z and get larger as they advance, covering 0.234 to 0.413 inches — the gap between the largest number drill and the point where fractional sizes become fine enough to be useful.
The same hole in the other systems
Three drill systems overlap across this range and a workshop rarely has all three. The nearest bit of each other kind to M:
| System | Nearest size | Difference |
|---|---|---|
| number | #1 — 0.228 in | 0.067 in smaller |
| fractional | 19/64" — 0.2969 in | 0.0019 in larger |
| metric | 7.5 mm | 0.007 mm larger |
One of those is within three thousandths of an inch, which is inside the tolerance of most hand-held work — substitute it and nobody will know.
What gets drilled at 0.295 inches
Where the quarter-inch and five-sixteenths taps are drilled, and where clearance holes for small bolts begin. The three drill systems overlap most densely across this band, which is why a bit here is the one most often picked up and misidentified.
Either side of it
| Drill | Inches | Millimetres |
|---|---|---|
| K | 0.281 in | 7.14 mm |
| 9/32" | 0.2813 in | 7.14 mm |
| L | 0.29 in | 7.37 mm |
| M | 0.295 in | 7.49 mm |
| 19/64" | 0.2969 in | 7.54 mm |
| N | 0.302 in | 7.67 mm |
| 5/16" | 0.3125 in | 7.94 mm |
Frequently asked questions
What size is a M drill bit?
0.295 inches, which is 7.49 mm. Letter drills run A to Z and get larger as the letter advances, filling the gap between the largest number drill and the fractional sizes.
What is a M drill bit in mm?
7.49 mm. A metric index will offer 7.5 mm as the nearest stocked size, which is near enough identical.
Is M a tapping drill size?
Not for any of the unified threads on this site. It sits between the sizes the standard taps call for, so it is a clearance or pilot drill rather than a tapping one.
What is the next size up from M?
19/64" at 0.2969 inches — 0.0019 inches larger. Below it is L at 0.29.
Other sizes
- 19/64" drill bit — 0.2969 in, 7.54 mm
- N drill bit — 0.302 in, 7.67 mm
- 5/16" drill bit — 0.3125 in, 7.94 mm
- O drill bit — 0.316 in, 8.03 mm
- P drill bit — 0.323 in, 8.2 mm
- 21/64" drill bit — 0.3281 in, 8.33 mm
- Q drill bit — 0.332 in, 8.43 mm
- R drill bit — 0.339 in, 8.61 mm