Toolman

726 × 2040 mm door

726 × 2040 mm

28.6 × 80.3 in · 2′ 5″ × 6′ 8″ · United Kingdom

What this door is for

The metric range middle size. Common in houses built since the 1990s, and the reason a replacement door bought by eye often turns out 59 mm too short.

Three measurements, not one

A door has a leaf size, a rough opening and a clear width, and they are all different. Ordering against the wrong one is the usual way a door arrives that does not fit.

MillimetresInchesWhat it is
Leaf726 × 204028.6 × 80.3The door itself — what you order
Rough opening826 × 210032.5 × 82.7The hole in the wall, allowing for frame and shimming
Clear width68126.8What you can actually walk through with the door open

The clear width is the one that matters for getting furniture through and the one accessibility rules are written against — a 28.6-inch door does not give a 28.6-inch opening, because the leaf thickness and the stop remain in the way.

Other United Kingdom sizes

DoorLeafRough openingClear width
610 × 1981 mm610 × 1981 mm710 × 2041 mm565 mm
626 × 2040 mm626 × 2040 mm726 × 2100 mm581 mm
686 × 1981 mm686 × 1981 mm786 × 2041 mm641 mm
762 × 1981 mm762 × 1981 mm862 × 2041 mm717 mm
826 × 2040 mm826 × 2040 mm926 × 2100 mm781 mm
838 × 1981 mm838 × 1981 mm938 × 2041 mm793 mm

Frequently asked questions

What is the rough opening for a 726 × 2040 mm door?

About 826 × 2100 mm (32.5 × 82.7 in). The opening has to take the leaf, the frame on both sides and enough slack to plumb it — roughly 50 mm each side and 60 mm above. Never order a door against the size of the hole.

How wide is the actual opening once the door is open?

About 681 mm of clear width. The leaf swings back but its thickness and the door stop stay in the way, so roughly 45 mm is lost. This is the figure accessibility rules are written against, not the door width.

What is a 726 × 2040 mm door used for?

The metric range middle size. Common in houses built since the 1990s, and the reason a replacement door bought by eye often turns out 59 mm too short.

What height is a 726 × 2040 mm door?

2040 mm (80.3 in). This is the taller genuinely metric British range, 59 mm above the old 1981 mm imperial standard — the two do not interchange.

All door sizes · Unit converters