271 capacitor value
270 pF
270 pF · 0.27 nF · 0.00027 µF
| Marked code | 271 |
| Picofarads | 270 pF |
| Nanofarads | 0.27 nF |
| Microfarads | 0.00027 µF |
| Farads | 2.70e-10 F |
Reading the code
The three digits are not a part number. The first two are the value in picofarads and the third says what to do with them:
27 × 101 = 270 pF
So 271 is 27 followed by 1 zero: 270 pF. The code is always in picofarads even when the part is sold in microfarads, which is the whole difficulty with it — a capacitor marked 271 is stocked as 0.00027 µF and the two numbers look nothing alike.
What 270 pF does at frequency
A capacitor's opposition to a signal is its reactance, 1 ÷ (2πfC), and it falls as the frequency rises. Over the range of frequencies a circuit can put across it, a 270 pF part covers several orders of magnitude:
| Frequency | Reactance |
|---|---|
| 50 Hz — mains | 11.79 MΩ |
| 1 kHz — audio | 589.46 kΩ |
| 100 kHz — switching | 5.89 kΩ |
| 10 MHz — RF | 58.95 Ω |
Ten times the frequency is a tenth of the reactance, every time — which is why choosing a decoupling capacitor is really choosing the frequency band you want it to be low-impedance across, and why boards carry several sizes in parallel rather than one large one.
The letter after the number
A code like 271K carries a tolerance letter. It is not part of the value:
| Letter | Tolerance | 270 pF means |
|---|---|---|
271J | ±5% | 256.5 pF to 283.5 pF |
271K | ±10% | 243 pF to 297 pF |
271M | ±20% | 216 pF to 324 pF |
271Z | +80% / −20% | 216 pF to 486 pF |
A Z is worth knowing about. +80%/−20% is a real tolerance on cheap high-permittivity ceramics, and it means a part marked 271Z can legitimately be anything from 216 pF to 486 pF. Those go in decoupling positions where only the rough size matters, never in a timing or filter position.
Where 270 pF turns up
Hundreds of picofarads is filtering at radio frequencies and the timing element in fast oscillators. Below a nanofarad, a ceramic capacitor is close to ideal — very little loss, very little drift — which is why this range is used where accuracy matters.
Frequently asked questions
What is the value of a 271 capacitor?
270 pF — 270 pF · 0.27 nF · 0.00027 µF. The first two digits are the value in picofarads and the third is how many zeros follow, so 271 is 27 followed by 1 zero = 270 pF.
What is a 271 capacitor in µF?
0.00027 µF. Going from picofarads to microfarads is six decimal places, which is where most of the confusion with these codes comes from — 270 pF, 0.27 nF and 0.00027 µF are the same capacitor written three ways.
What does the letter after 271 mean?
Tolerance. 271K is ±10%, 271J is ±5% and 271M is ±20% — so a 271K is anywhere from 243 pF to 297 pF and still in specification. A Z means +80%/−20%, which is not a mistake: some ceramic dielectrics really are that loose.
What is the impedance of a 271 capacitor at 1 kHz?
589.46 kΩ. Reactance is 1 ÷ (2πfC), so it falls as the frequency rises: the same part is 5.89 kΩ at 100 kHz and 58.95 Ω at 10 MHz.
Nearby codes
- 331 capacitor — 330 pF
- 391 capacitor — 390 pF
- 471 capacitor — 470 pF
- 561 capacitor — 560 pF
- 681 capacitor — 680 pF
- 821 capacitor — 820 pF
- 102 capacitor — 1 nF
- 122 capacitor — 1.2 nF
- 152 capacitor — 1.5 nF
- 182 capacitor — 1.8 nF