Toolman

JIS B1 in pixels

8598 × 12165 px

at 300 DPI, the print standard · JIS B1 is 728 × 1030 mm · 104.6 megapixels

JIS B1 size in pixels has no single answer, because a pixel is a length only once a resolution decides how many fit in an inch. The JIS B1 pixel size is 8598 × 12165 px at the 300 DPI print standard and 2064 × 2920 px at the 72 DPI screen convention — every resolution in between is in the table below.

JIS B1 at every resolution

A sheet of paper has no pixel size of its own. It has a physical size — 728 × 1030 mm, or 28.66 × 40.55 inches — and a pixel count only appears once you choose how many pixels go in each inch.

ResolutionPixelsMegapixelsUncompressed 24-bitUse
72 DPI2064 × 29206.0 MP17 MBScreen only — visibly soft in print
96 DPI2751 × 389310.7 MP31 MBScreen only — visibly soft in print
150 DPI4299 × 608326.2 MP75 MBDrafts, internal documents, large-format viewed from a distance
200 DPI5732 × 811046.5 MP133 MBAcceptable for office printing
300 DPI8598 × 12165104.6 MP299 MBThe commercial print standard
400 DPI11465 × 16220186.0 MP532 MBFine detail and small type
600 DPI17197 × 24331418.4 MP1.17 GBLine art, technical drawings, archival scanning
1200 DPI34394 × 486611673.6 MP4.68 GBArchival and reproduction work

What the file size means for JIS B1

At 300 DPI an uncompressed JIS B1 is 299 MB, and at 600 DPI it is 1.17 GB — four times as much, because doubling the resolution doubles both dimensions. That squaring is the reason large formats become unwieldy so quickly: the same 300 DPI that produces a manageable file at small sizes produces 299 MB here.

If a file is going to a printer, ask what they want before choosing. 300 DPI is the safe default and 150 is often enough for anything read from more than arm's length.

Setting up the canvas

Width:      8598 px
Height:     12165 px
Resolution: 300 pixels/inch
Colour:     CMYK for print, RGB for screen
Bleed:      3 mm on every edge → 8669 × 12236 px

The bleed figure is the one people forget: artwork that runs to the edge must extend 3 mm past it on all four sides, so the working canvas is larger than the finished sheet.

Frequently asked questions

What is JIS B1 in pixels?

There is no single answer — it depends on the resolution. At the print standard of 300 DPI, JIS B1 is 8598 × 12165 pixels. On screen at 72 DPI it is only 2064 × 2920.

What resolution should an JIS B1 document be?

300 DPI for anything going to a commercial printer, which makes the canvas 8598 × 12165 pixels. 150 DPI (4299 × 6083) is acceptable for a draft or an internal document. Large formats read from a distance can go lower — a poster viewed from two metres looks sharp at 150 DPI, and dropping to it here saves 224 MB of file.

How big is an JIS B1 file at 300 DPI?

About 299 MB uncompressed at 24-bit colour — 8598 × 12165 × 3 bytes. Compression brings that down a great deal for flat artwork and very little for a photograph, which is why a print-ready JIS B1 PDF is usually tens of megabytes.

How many megapixels is JIS B1 at 300 DPI?

104.6 megapixels. For comparison, JIS B1 at 600 DPI is 418.4 MP — quadruple, because doubling the resolution doubles both dimensions.

Other sizes in pixels

JIS B1 in millimetres, inches and points · All paper sizes · Screen resolutions