Half Letter in pixels
1650 × 2550 px
at 300 DPI, the print standard · Half Letter is 139.7 × 215.9 mm · 4.2 megapixels
Half Letter at every resolution
A sheet of paper has no pixel size of its own. It has a physical size — 139.7 × 215.9 mm, or 5.5 × 8.5 inches — and a pixel count only appears once you choose how many pixels go in each inch.
| Resolution | Pixels | Megapixels | Uncompressed 24-bit | Use |
|---|---|---|---|---|
| 72 DPI | 396 × 612 | 0.2 MP | 0.7 MB | Screen only — visibly soft in print |
| 96 DPI | 528 × 816 | 0.4 MP | 1.2 MB | Screen only — visibly soft in print |
| 150 DPI | 825 × 1275 | 1.1 MP | 3.0 MB | Drafts, internal documents, large-format viewed from a distance |
| 200 DPI | 1100 × 1700 | 1.9 MP | 5.4 MB | Acceptable for office printing |
| 300 DPI | 1650 × 2550 | 4.2 MP | 12 MB | The commercial print standard |
| 400 DPI | 2200 × 3400 | 7.5 MP | 21 MB | Fine detail and small type |
| 600 DPI | 3300 × 5100 | 16.8 MP | 48 MB | Line art, technical drawings, archival scanning |
| 1200 DPI | 6600 × 10200 | 67.3 MP | 193 MB | Archival and reproduction work |
What the file size means for Half Letter
At 300 DPI an uncompressed Half Letter is 12 MB, and at 600 DPI it is 48 MB — four times as much, because doubling the resolution doubles both dimensions. That squaring is the reason large formats become unwieldy so quickly: the same 300 DPI that produces a manageable file at small sizes produces 12 MB here.
If a file is going to a printer, ask what they want before choosing. 300 DPI is the safe default and 150 is often enough for anything read from more than arm's length.
Setting up the canvas
Width: 1650 px
Height: 2550 px
Resolution: 300 pixels/inch
Colour: CMYK for print, RGB for screen
Bleed: 3 mm on every edge → 1721 × 2621 pxThe bleed figure is the one people forget: artwork that runs to the edge must extend 3 mm past it on all four sides, so the working canvas is larger than the finished sheet.
Frequently asked questions
What is Half Letter in pixels?
There is no single answer — it depends on the resolution. At the print standard of 300 DPI, Half Letter is 1650 × 2550 pixels. On screen at 72 DPI it is only 396 × 612.
What resolution should an Half Letter document be?
300 DPI for anything going to a commercial printer, which makes the canvas 1650 × 2550 pixels. 150 DPI (825 × 1275) is acceptable for a draft or an internal document. Large formats read from a distance can go lower — a poster viewed from two metres looks sharp at 150 DPI, and dropping to it here saves 9.0 MB of file.
How big is an Half Letter file at 300 DPI?
About 12 MB uncompressed at 24-bit colour — 1650 × 2550 × 3 bytes. Compression brings that down a great deal for flat artwork and very little for a photograph, which is why a print-ready Half Letter PDF is usually tens of megabytes.
How many megapixels is Half Letter at 300 DPI?
4.2 megapixels. For comparison, Half Letter at 600 DPI is 16.8 MP — quadruple, because doubling the resolution doubles both dimensions.
Half Letter in millimetres, inches and points · All paper sizes · Screen resolutions